Instruction Sheet for Solar Mobile phone Charger
Outline
This charger receives solar energy by solar panel which is later transformed into electricity. It can charge all type of Mobile Phone as well as DC, MP and so on. LED super white light serves as a plus.
How-it-works
Under the sun, electricity from photovoltaic cells (PVs) is stored into the internal Li-ion battery. You may also connect it with you digital gadgets and charge them directly.
How-to-use
When using photovoltaic cells (PVs) to charge Mobile Phone directly: simply open the charger and keep it under sunshine.
When using internal battery to charge Mobile Phone, with Mobile Phone connected to hole push the switch to CH side, LED2 indicator turning red signals charging process is began.. LED indicator turning green signals the charging process successful done.
When using wall socket to charge the internal battery: connect DC to Hole 1, LED2 indicator turning red signals charging process is began. LED turning green signals charging process is successful done.
LED light: when the switch is pushed to LED side, “outdoors super white light” function is ready
1． LED light：outdoors super white light
2． The indicating light on the right side of IN
3． The light on the right side of OUT (Mobile Phone charger working light)
4． Switch (LED side is for LED lighting, CH side is for Mobile Phone charging control)
5． IN hole ( for wall socket)
6． OUT hole (for Mobile Phone charge)
Warnings:
（1）Have the internal battery charged before use, by home power or solar.
（2）Keep it away from fire.
（3）The internal battery is for emergency case of travel, business trip or field work.
（4）Avoid wetting it and keep the internal battery and component dry.
（5）Never use metal subject to short circuit it.
（6）Forbid to dissemble the charger, or that will be out of warranty.
（7）The product is coupled with wall power charger. If necessary, just connect it with DC 100V~240V
（8）Read instruction sheet carefully. Inappropriate operation may cause the damage to the internal battery and component and result in the decrease of the battery volume.
Problems you may come across and solution is here.
When using photovoltaic cells (PVs) to charge Mobile Phone directly, the IN indicating light may flash red, it is probably due to the low voltage of the internal battery, charge the internal battery before use.
When using internal battery to charge Mobile Phone: if slight sound comes out, please take it as normal.
When using internal battery to charge Mobile Phone, OUT indicating light may flash green and red, it signals charging process is soon to the end. Please take it as normal.
If switch is on CH side, OUT indicating light being out, it signals the internal battery voltage is low, the self-protection circuit will stop working. Charge the built-in battery first.
If the switch is on LED side, but light is out, it is possible due to the low voltage of the internal battery, charge it first to make it back to normal.
Note: Full charging and discharging for the first three uses for the complete activation of the battery.
1、 Charge the battery for at least 12hrs for the first three times with household power.
2、 Re-Charge the battery only after complete discharging for the first three times.
Material
Exterior shell-----ABS
Solar panel---- MONOCRYSTALLINE SILICON with up-to-date most stable power
Storage battery----the safest Al-shelled li-ion battery(Grade A battery)
Smart voltage-adjusting technology which is capable of identifying the output voltage and current.. Safe-protection
Accessory
1、100V~220V AC charger
2、exchanged plug 4 sets,
3、USB cable ( fit to most MP3, MP4, cell phone and DC)
4、wire line more then 1 meter,
5、Certificate.
